|
| 殼牌潤(rùn)滑油系列 > 殼牌航空渦輪機(jī)油 > AEROSHELL TURBINE OIL560/AEROSHELL TURBINE 560 |
| AEROSHELL TURBINE OIL560/AEROSHELL TURBINE 560 詳細(xì)說(shuō)明 （瀏覽1567次） |
AEROSHELL TURBINE OIL 560
AeroShell Turbine Oil 560 is a third generation, high performance, low
coking 5 mm
2
/s synthetic hindered ester oil incorporating a carefully
selected and finely balanced combination of additives to improve thermal
and oxidation stability.
APPLICATIONS
Changes which have taken place over the last twenty years in engine
performance (in terms of improved fuel consumption, higher operating
temperatures and pressures) and maintenance practices have resulted in
increased severity in lubricant operating conditions.
AeroShell Turbine Oil 560 was developed to withstand the hostile
environments of today’s high powered, high compression engines in which
the older generation of oils can be stressed up to and beyond their thermal
limits, as evidenced by oil coking in the high temperature bearing areas.
By overcoming the problems associated with using old technology oils in
new technology engines, AeroShell Turbine Oil 560:
* maintains a cleaner engine
* provides improved load carrying capacity
* reduces maintenance costs
* prolongs bearing life
in both new and existing engines.
In order for military authorities to take advantage of this better performance
in military engines the specification MIL-PRF-23699 was re-written to
include a "High Thermal Stability" (HTS) grade as well as the Standard
(STD) and Corrosion Inhibited (C/I) grades. AeroShell Turbine Oil 560 is
fully approved as an HTS oil.
With effect from January 1st 2002, AeroShell Turbine Oil 560 has been
manufactured with an improved formulation to further enhance its
anti-coking performance.
AeroShell Turbine Oil 560 contains a synthetic ester oil and should not be
used in contact with incompatible seal materials and it also affects some
paints and plastics. Refer to the General Notes at the front of this section
for further information.
SPECIFICATIONS
U.S. Approved MIL-PRF-23699F Grade HTS
British Equivalent DEF STAN 91-101
French Equivalent DCSEA 299/A
Russian Analogue to VNII NP 50-1-4F, B3V,
LZ-240, VNII NP 50-1-4U and 36/Ku-A
NATO Code O-154
Joint Service Designation Equivalent OX-27
Pratt & Whitney Approved 521C Type II
General Electric Approved D-50 TF1
Allison Approved EMS-53 (Obsolete)
EQUIPMENT MANUFACTURER’S APPROVALS
AeroShell Turbine Oil 560 is approved for use in all models of the following
engines:
Honeywell TFE 731, TPE 331, APUs (majority of
models), LTS 101, LTP 101, ALF 502,
LF 507, AS907, AS977
Allison (Rolls-Royce) 250 Series
BMW/Rolls-Royce BR710, BR715
CFM International CFM-56 (all models)
CFE CFE 738
GE GE 90, CF6 (all models), CJ610,
CF700, CT58, CF34 |
|
|
